MARLEY DT FLUID COOLER

MARLEY DT FLUID COOLER

EVAPORATIVE FLUID COOLER

Higher Performance. Higher Dry Switchpoint.

An induced-draft, coil only closed-circuit cooling tower, the Marley® DT Fluid Cooler with Aero-X™ coil technology provides dry operation flexibility that fill/coil hybrid coolers cannot.

Aero-X Coil Technology Maximizes Thermal Capacity Per Coil Row*

The lowest air-side pressure drop (up to 10% more airflow at the same fan HP) and higher heat rejection capacity per coil row – benefits realized with the DT Fluid Cooler’s Aero-X coil technology – provide opportunities to reduce equipment size and/or lower energy consumption, while maintaining the dry operation flexibility that coil only closed circuit coolers are known for.

Higher Dry Switch Point – Up To 10F+ Higher*

Whether the motivation for seasonal dry operation is to reduce site water usage, minimize water treatment costs or simplify operation in freezing conditions, higher dry switch point temperatures enable achievement of those objectives a larger portion of the year. With up to 10°F + higher dry switch point, the DT Fluid Cooler may enable up to 15-20% incremental annual hours in dry mode. Annual water savings per cooling ton of 3,000 gallons/ton and $40/ton are achievable in many areas, depending on climate conditions. Optional finned coils further enhance dry operation capability at higher ambient temperatures.

Lower Fluid Pressure Drop – Up To 30%

Reduced pumping energy requirements compared to the previous generation positively impact system operating cost and energy consumption. *vs other conventional coil only evaporative fluid coolers

Product Details:

• Induced Draft Counterflow Closed Circuit Fluid Cooler
• Availability: Worldwide
• Thermal Capacity: 58 – 300 tons (255 – 1319 kW) per cell
• Flow Range: 80 – 1800 gpm (18 – 409 m3/hr) per cell
• New Aero-X Coil Technology
• Higher Dry Switch Point*
• Lower Fluid Pressure Drop
• CTI Certified
• ASHRAE 90.1 Compliant
• OSHA compliant